Brady PS-C-750-WT - PermaSleeve Heat Shrink Wire and Cable Continuous Labels for 3" Core Printers - 3/4" Dia White

Manufacturer: Brady
Category: Wire & Cable Sleeves
Model # PS-C-750-WT (133092)
Pemro # BDL-5500

$242.99 $ 228.69/each

Ships in 1 business day

PermaSleeve Heat Shrink Tubing is engineered for thermal transfer or dot matrix printing and is ideal for use in wire identification.

This roll has i75-series smart properties on the sideboard that when used in the Brady i7500 printer in conjunction with i75-series smart ribbons, eliminates the need to adjust heat, speed , sensor location and mode, eliminates the need to calibrate out blank wasted labels, and warns the operator if a non-approved ribbon is used with this roll.
This narrow-width part is supplied on a 3 inch core with plastic sideboards attached to prevent material telescoping and to support i75-series smart tag placement.
If used in any other 3 inch core printer this roll will function as a manual roll.
A ribbon is required to print this material. Use Part Number IP-R6606 for the BradyPrinter i5100 or BRADY IP® Series Label Printer; use R6606 for a different printer
This part is required to be externally fed into most thermal transfer printer models and will not physically mount inside the printer
When used with BradyPrinter i5100 and BRADY IP® Series Label Printer this part will also operate in full manual mode and is not enabled with Brady PrintSmart chip technology
For use with other printers, consult printer's specification for minimum media width and material type compatability, and test for intended use

Application: Wire and Cable Labeling
Brand Name: Brady®
Color: White
Continuous or Die-cut: Continuous
Enables Industry Compliance (North America): Method 215, Method 215K, MIL-DTL-23053/5 Class 1, MIL-M-81531, MIL-STD-202, MIL-STD-202F, RoHS Compliant, UL 224
Industry Compliance: UL
Print Technology: Thermal Transfer
Printable Sides: Single-Side Printable
Printer and Label Applications: Wire & Cable
Printer Compatibility: BBP12, BBP72, i5100, i7100, i7500, PR Plus, IP Series, THT 3" Core Printers, i7500
Printer supply or Pre-printed: Printer supply
Recommended Ribbon: i75-R6606, IP-R6606, R6606
Recommended Ribbon Series: R4300, R5000, R6600
Ribbon Series: R4300
Smart Cell: No
Trade Name: PermaSleeve®
Label Properties: Heat Shrink
Material Properties: Flame-retardant, Heat-shrinkable
Approval/Compliance (EMEA): UL Recognised to UL224, SAE-AMS-DTL-23053/5 C (Class 1), SAE AS-81531
Brady Material Number: B-342
Finish: Matte
Material: Heat-shrink Polyolefin
Material Type: Polyolefin
Maximum Service Temperature (°C): 135 °C
Maximum Service Temperature (°F): 275 °F
Minimum Service Temperature (°C): -55 °C
Minimum Service Temperature (°F): -67 °F
Service Temperature Range (°C): -55 °C - 135 °C
Service Temperature Range (°F): -67 °F - 275 °F
Shrink Ratio: 3:1
Core Diameter (imperial): 1.625 in
Core Diameter (metric): 41.28 mm
Diameter as Supplied (imperial): 0.75 in
Diameter as Supplied (metric): 19.05 mm
Dimensions (imperial): 1.25 in H x 0.75 in Dia x 50 ft L
Dimensions (metric): 31,75 mm (H) x 15,24 m (L)
Height (imperial): 1.25 in
Height (metric): 31.75 mm
Length (imperial): 50 ft
Length (metric): 15.24 m
Maximum Wire Diameter (imperial): 0.7 in
Maximum Wire Diameter (metric): 17.78 mm
Maximum Wire Gauge: 0000 AWG
Minimum Wire Diameter (imperial): 0.25 in
Minimum Wire Diameter (metric): 6.35 mm
Minimum Wire Gauge: 6 AWG
Recovered Diameter (imperial): 0.25 in
Recovered Diameter (metric): 6.35 mm
Recovered Wall Thickness (imperial): 0.025 in
Recovered Wall Thickness (metric): 0.64 mm
Roll Length (imperial): 50 ft
Roll Length (metric): 15.24 m
Sleeve Size (imperial): 0.75 in Dia x 50 ft L
Sleeve Size (metric): 19.05 mm Dia x 15.24 m L
Wire Diameter Range (imperial): 0.25 in - 0.7 in
Wire Diameter Range (metric): 6.35 mm to 17.78 mm
Wire Gauge Range: 6 AWG - 0000 AWG
EU RoHS Compliant: Yes
CA Prop 65 Warning: Cancer risk from exposure to Antimony Trioxide. See www.P65Warnings.ca.gov