Tohnichi TDT600CN3-G - Digital Torque Screwdriver Tester

Manufacturer: Tohnichi
Category: Torque Testers & Analyzers
Model # TDT600CN3-G
Pemro # TON-4473

$4,054.00 $ 3,319.06/each

Available to Order

Ideal for Testing Click and Dial Indicating Torque Screwdrivers & Small Torque Wrenches
Newly added judgment function, USB output, and increased resolution
Multiple units of measure selection by keypad
Loading devices keep tooling stable during testing procedure for more accurate readings
Optional Accessories:
TDTLA3 Loading Bar for Testing Small Capacity Torque Wrenches
LTA Loading Fixture for Dial Indicating Torque Screwdriver

Model TDT2-G: Multiple Unit of Measure Models

Accuracy ±1%+1Digit

Model	Torque Range								Square Drive	Dimensions [mm]			Weight Approx.	Standard Accessories
	cN•m		kgf•cm		ozf•in		lbf•in
	Min.- Max.	1 digit	Min.- Max.	1 digit	Min.- Max.	1 digit	Min.- Max.	1 digit	mm	Overall Length	Width	Height	kg
TDT60CN3-G	2-60	0.005	0.2-6	0.0005	3-80	0.005	0.2-5	0.0005	6.35 Hex (Male) with a groove (0.7mm)	230	220	225	11	•AC Adapter (BA-6) •Loading Device for Click Type Screwdrivers (STA)
TDT600CN3-G	20-600	0.05	2-60	0.005	30-800	0.05	2-50	0.005

“-G” models feature 4 changeable units of measure through keypad set up
Factory certificate of calibration is included and data is supplied in SI units only.
NIST Traceable certificates are available upon request for an additional fee. For NIST certifications any one of the units of measure may be selected to be shown on the certificate.

Common Specification

DATA MEMORY			1000 data
STATISTICAL PROCESSING			Sample size, max./min./mean values
MEASUREMENT MODE			PEAK / RUN
ZERO ADJUSTMENT			Auto
UPPER/LOWER LIMIT VALUE SETTNG			10
DATA OUTPUT			RS232C-compliant, USB (B type), serial communication
RESET			Manual /Auto [settable in the range from 0.1 to 5.0 sec.]
Square Drive			hex 6.35 (Male) minus 0.7mm (with groove)
OPERATING TEMPERATURE RANGE			0 ~ 40°C (without condensation)
POWER			AC 100 ~ 240V 50/60Hz
STA Loading Device for Click Drivers (LTD/RTD) Standard	Applicable Grip Diameter		7 to 50mm
LTA Loading Device for Indicating Drivers (FTD) Optional
Applicable Models ( ) is applicable for a part of the capacity range	STA Loader	LTD/RTD	15, 30, 60CN	(60), 120, 260, 500CN
		NTD/RNTD	15, 30, 60CN	(60), 120, 260, 500CN
		AMLD	(4), 8CN
		BMLD	15, 30CN
	LTA Loader (0ptional)	FTD	50CN	(50), 100, 200, 400CN
		FTD2-S	(5), 10, 20, 50CN	(50), 100, 200, 400CN
		STC	50CN	(50), 200, 400CN